74.8KW 400mm 400 Ton Rubber Brake Pad Making Machine

Double Working Efficiency Brake Pads Molding Machine

Maintainence Points For Vulcanizing Machine:

1. The vulcanizer should be stored in a dry and well-ventilated environment to avoid damp electrical circuits due to humidity, which will affect the normal use of the equipment!
2. Avoid using the vulcanizer outdoors on rainy days to prevent water from entering the heating plate and electric control box!
3. If the vulcanizer is used in a humid and watery environment, when disassembling and transporting the vulcanizer, items should be used to raise it so that there is a certain distance between the equipment and the bottom edge, and the vulcanizer should not be in direct contact with water!
4. If water enters the heating plate due to improper operation during use, contact the manufacturer for repair as soon as possible. If you need emergency repairs, you can open the cover of the heating plate, first pour out the water, set the electric control box to manual operation, heat to 100 degrees Celsius, keep the temperature for half an hour, dry the line, and perform it in the manual state Gluing, and contact the manufacturer at the same time to replace the circuit as a whole!
5. When the vulcanizer is not used for a long time, the hot plate should be heated every half month (the temperature is set at 100 degrees Celsius), and the temperature is kept for about half an hour!
6. After each use, drain the water in the water pressure plate, especially in winter.

Hydraulic Press Machine Features:

1. The speed can be adjusted steplessly
2. It can realize the distance control of the operation
3. High pressure can be achieved, and a larger output force can be obtained with a smaller volume
4. Able to realize automatic control of force, speed and direction

Plate Vulcanizing Machine Parameters:

Machine Application Images: