Durable Silicone Rubber Industry Hot Press Machinery

Durable Silicone Rubber Industry Hot Press Machinery

• Brief description of flat vulcanizing machine: Conveyor belt vulcanizing machine is mainly used for vulcanizing flat-type adhesive tape, rubber sheet, polymer and other flat sheet products. It has the advantages of high pressure per unit area of ​​hot plate, reliable operation of equipment and less maintenance. . The main function of the vulcanizing press is to provide the pressure and temperature required for vulcanization. The pressure is generated by the hydraulic system through a hydraulic cylinder, and the temperature is provided by a heating medium (usually steam, heat transfer oil, etc.). The flat belt vulcanizing machine can be mainly divided into two types: column flat belt vulcanizing machine and frame flat belt flat vulcanizing machine according to the structure of the frame; according to the number of working layers, there can be single layer and multiple layers: according to the hydraulic system The working medium can be divided into oil pressure and water pressure. In the rubber industry, the column flat belt vulcanizing machine is an earlier type of machine. The flat belt vulcanizing machine used in China in the past is also a column structure, but at present, the frame structure is mostly used.
• Function: Rubber flat vulcanizing machine is mainly used for vulcanizing flat tape. It has the advantages of high pressure per unit area of ​​hot plate, reliable operation and less maintenance. The main function of flat vulcanizing machine is to provide the pressure and temperature required for vulcanization. It is produced by the hydraulic system through the hydraulic cylinder, and the temperature is provided by the heating medium. The flat belt vulcanizing machine can be mainly divided into two types: the column type flat belt vulcanizing machine and the frame type flat belt flat vulcanizing machine according to the structure of the frame; The number of layers can be divided into single layer and double layer: according to the hydraulic system working medium, there can be oil pressure and water pressure. In the flat vulcanizing machine rubber industry, the column flat belt vulcanizing machine is an earlier type of machine. The flat belt vulcanizing machine used in China in the past is also a column structure, but at present, the frame structure is mostly used. The frame type flat belt vulcanizing machine has the following advantages compared with the column flat belt vulcanizing machine: 4. Under a certain center distance, it is allowed to install a hydraulic cylinder of a larger diameter, thereby reducing the number of hydraulic cylinders and having a simple structure. , the amount of maintenance is small.

As a conveyor belt joint tool, the vulcanizing machine should be maintained and maintained in the same way as other tools during and after use to extend the service life. At present, the vulcanizing machine produced by Junan Machinery has a service life of 8 years as long as it is properly maintained.

1. The maintenance of the vulcanizer should be noted that the storage environment of the vulcanizer should be kept dry and well ventilated to avoid the wetness of the electrical circuit due to moisture; do not use the vulcanizer outdoors on rainy days to prevent the electric control box and the heating plate from entering the water; Wet, watery, when dismantling and handling the vulcanizing machine, the items should be raised on the ground, and the vulcanizer should not be in direct contact with water;
2. If the heating plate enters the water due to improper operation during use, first contact the manufacturer for repair. If emergency repair is required, open the cover on the hot plate, pour the water out first, then set the electric control box to manual operation, warm to 100 ° C, keep the temperature for half an hour, and dry the line. The belt is glued in the manual state. At the same time, the manufacturer should be contacted in time to make the overall replacement of the line.
3. When the vulcanizer does not need to be used for a long time, the heating plate should be heated every half month (temperature setting 100 ° C), and the temperature is maintained for about half an hour.
4. After each use, the water in the water pressure plate should be cleaned, especially in winter. If the water cannot be cleaned, the water pressure plate rubber will prematurely age and the service life of the water pressure plate will decrease.
5. The correct way to release water is after the vulcanization is completed and the vulcanizer is not removed before disassembly. If the water is released after the machine is disassembled, the water in the water pressure plate may not be completely discharged.