Four Balance Cylinder Floating Equal Pressure Brake Pads Molding Machine

Four Balance Cylinder Floating Equal Pressure Brake Pads Molding Machine

1. Make sure each cavity can bear the same pressure even wth more or less raw material input.
2. Keep the same pressure can make sure the brake pads can be the same density.
3. Only the same density brake pads is the qualified finish products.
4. 4 cylinder can ensure enough compressing pressure with hydraulic system.
5. Save 30%-40% raw material, efficiently avoid raw material waste.
6. Automatically adjust the brakes thickness, ensure every brakes is the standard products.
7. Automatically adjust the pressure with 4 cylinders, make sure the same pressure and density of each finish products.

1. The whole equipment adopts SIEMENS PLC control system, and reserved Industrial Ethernet interface.
2. 12 inch industrial tablet computers display the running status of each station equipment in real time.
3. 6 inch touch screen displays the running status of single station equipment in real time.
4. The mold heating system single station control, temperature PID control, mold cavity temperature effectively controlled at + 3 degrees;
5. The pressing pressure is feedback from the high-precision pressure sensor, real-time control, and the main cylinder pressure is controlled within an accuracy of + 0.3PMa.
6. When the oil pump is kept under pressure, the motor will stop working and store energy by accumulator to make up the pressure and save energy.

• Through the hot press, the friction material and the steel back are placed, the steel back is glued, and the friction material and the steel back are adhered together by heat and pressure.
• The hot pressing is divided into the hot pressing of the normal model and the hot press of the mold.

Machine Main Parameters:

Main Accessories of the Machine:

Reference Images: