Silicone Earplug Vulcanizing Press Machine , 500 Ton Rubber Vulcanization Molding Machine

 Silicone Earplug Injection Machine 500 Ton Plate Vulcanizing Injection Machine For Anti-Noise
 

machine Features:

1. This machine is versatile and suitable for opening double or triple-layer formwork on top.

2. High-power adopts double pressure; each oil system is designed separately. Consistent, quiet and low frequency failure.

3. Both axes can be operated simultaneously.

4. Slow moving speed can be used for safer and more accurate alignment.

5. Mold can be precisely positioned. The 100% secure positioning prevents mold damage.

6. The speed of opening and closing the mold is adjustable. This is very accurate and reliable.

Specific Characteristic:

1. Able to assemble/install separate Ejection mechanism that suitable for bigger size molding part
2. Multi-pillar plate vulcanizing machine.
3. Anti-collision Molding System prevents mold damage occurring from misalignment (Patented).
4. It has various demolding method: 2RT, 3RT, 4RT.
5. Dual power bank design to ensure the twin stations could work independently and safely.

The Introduction of 2RT demolding:

1. 2RT machine is multi-functional, because it is suitable to be used for top opening double or triple mold plates.
2. High force employs dual pressure and each oil system is designed separately. It is consistent, quite and low frequency of malfunctions, two shafts can be operated simultaneous.
3. Slow moving speed is available for alignment safer and more accurate.
4. Molds can be precisely positioned. A 100% safety design for positioning is available to prevent molds from damage.
5. The speed to open and close the mold is adjustable; it is very accurate and reliable.

2RT Machine motions flow:

1. Setup the mold(initial status)
2. Supply the materials and start the process(close the mold)
3. Load the mold
4. The main ran goes up rapidly to a predetermined position,
5. The main ram goes up slowly, increase the pressure for molding. Expel bubbles out and curing.
6. The main ram goes down rapidly.
7. Unload the mold at a determined position.
8. Open mold and take out the final products.

Main Technical Parameters: