Payment & Shipping Terms:
|Clamp Force:||550ton||Plate Size::||700*1500mm|
|Gross Weight::||25 Ton||Heater Power::||45kw|
|Injection Capacity: 1:||12000cc||Machine Type:||Horizontal|
automatic rubber moulding machine,
rubber transfer moulding machine
11kv Line Post Insulators Horizontal Injection Silicon Moulding Machine 500 Ton Clamp Force
Vulcanizer can not be overloaded
The total pressure of the vulcanizer is fixed. It is forbidden to concentrate the load during normal production work, and it is forbidden to use overload. In the production process, we must always pay attention to the temperature of the shut-off valve control hot plate, in strict accordance with the requirements of the production process.
The axial piston pump is used for the first time, or after repeated use for a long time, it is necessary to inject pure working oil into the plunger pump through the oil return port. It is strictly forbidden to use contaminated or dirty oil, otherwise it will have serious adverse effects on the machine, resulting in too many unqualified products, which can damage the equipment.
The power supply used by the vulcanizer in the work should be stable and reliable; otherwise the unstable and unstable phone will cause the malfunction of the solenoid valve.
The pressure of the relief valve cannot be adjusted arbitrarily during the operation of the equipment; otherwise the equipment will be damaged due to overload. Serious accidents may occur.
550 ton horizontal rubber injection machine parameter:
Clamping Force: 550 ton
Injection Capacity: 12000cc
Injection pressure: 2000kgf/cm²
Plate size: 700*1500mm
Min. Mold Thickness: 510mm
Plunger stroke: 700mm
Distance of heating plate: 960mm
Distance of Tie bar: 850*640mm
Die sinking type: 2RT-3RT-4RT
Max. Operating Pressure: 20Mpa
Motor Power: 5.5kw
Heater Power: 45kw
Total Power: 80kw
Gross weight: 25 ton
Other capacity parameter:
If you want machine video and see how our machine produce silicone rubber products ,
please send enquiry to us!
Contact Person: info