Independent Oil Circuit Vacuum Compression Molding Machine 200 Ton Clamp Force

200 Ton Clamp Force Independent Oil Circuit Vacuum Compression Molding Machine

How to Increase the Working Efficiency of Vacuum Compression Machine:

• Without changing the overall structure of the vulcanizing press, we can only start from other aspects, that is, to change some of the local construction or to change some parts to improve the vulcanization efficiency of the vulcanizing press.
• In order to improve work efficiency, it is necessary to reduce the power consumption in the vulcanization process of the flat vulcanizing machine. We can use the electromagnetic clutch passive anti-drive reel form to reduce the friction between the wire rope spindle and the reel, reduce the power required for pre-tensioning, and accurately provide The pre-tension of the single steel rope reduces the number of reducer-motor group, which can reduce the energy consumption and maintenance difficulty, reduce the overall space size of the wire rope pre-tensioning station, and improve the convenience of replacing the wire rope spindle. In terms of reducing the size of the space, the individual hydraulic cylinders are distributed and the force is already occupied by the space, and the wire ropes of different wire diameters are used.

Vulcanizing Machine Working Technology:

• When the motor of the vulcanizer is running, the oil enters the oil pump from the oil filter of the storage tank, and enters the control valve through the oil pump drain pipe. At this time, if the manual control valve is in the closed position, the oil enters the oil cylinder through the control valve and the oil pipe. Drive the plunger up.
• When the pressure of the vulcanizer reaches the specified value, if the motor is stopped, the check valve will automatically close, so that the pressure in the cylinder will be kept down. If the manual valve is opened, the lifting platform and the plunger will have their own weight. The oil inside is pressed back to the storage tank through the cylinder manual control valve and the oil pipe, the hot plate is lowered, the pressure gauge is controlled on the control valve, and is connected with the hydraulic cylinder.
• The vulcanizer is suitable for pressing various molded products, such as pressed rubber and plastic, as well as for sheet products. The machine tool is a four-column overall structure, and the pressing type is a lower pressing type, which is divided into three parts: a main unit, a fuel tank and an electric control box. The main unit is equipped with a plug, a cylinder, a fixed plate, a movable plate and the like. The fuel tank has oil pumps, pipes, valves and other components. The oil pump is driven by a motor, and the electric control box is equipped with a push button switch, a magnetic starter, a timing alarm, a brake temperature controller, an overload protector, and the like.
• When the vulcanizer overload can automatically cut off the power supply, the electric heating is controlled by the automatic temperature controller in three ways, and can be adjusted in the range of 20-200 degrees. When the temperature is reached, the circuit can automatically maintain the constant temperature to reach the set vulcanization time. .

Vacuum forming features:
(1) Saving raw and auxiliary materials, light weight, convenient transportation, good sealing performance, and meeting the requirements of environmentally friendly green packaging;
(2) It can pack any special-shaped products, and no additional buffer material is required for packing;
(3) The packaged product is transparent, beautiful in appearance and easy to sell;
(4) The packaged products are suitable for mechanization and automatic packaging, which is convenient for modern management, saving manpower and improving efficiency.

  
 
Vacuum Compression Machine Parameters:

 
 
Machine Application Images: