250mm Solid Silicone Kitchen Utensils Hot Press Machine

Silicone Kitchen Utensils Hot Press Machine

 
How Vacuum Molding Machine Works:
The fast air extraction method of the vacuum vulcanizing machine is to extract the air in the vacuum box during the free time of the vacuum pump, and wait until the air in the vacuum hood needs to be evacuated, so that the gas in the vacuum hood and the vacuum box The gas is connected, so that the gas in the vacuum hood and the gas pressure inside the vacuum box are balanced to achieve the purpose of rapid pumping.
 
Brief Introduction To Vacuum Compression Molding Machine:
Vacuum plate vulcanizing machine/suitable for rubber and plastic products/moulded vacuum vulcanization molding process, especially suitable for the production of various forms of seals. The product is molded and vulcanized in a vacuum negative pressure environment, which is easier to exhaust and not easy to form bubbles. There are single-base and double-base forms, with safety enclosure form, and clamping die mechanism. Users can choose to use according to process requirements.
The main body of the vacuum vulcanizing press is a side plate structure, which is composed of upper beams, side plates, front and rear doors and door frames, hydraulic cylinders, plungers, and hot plates.
There are oil pumps, motors, pressure regulating and reversing systems behind the main machine of the vacuum vulcanizing machine.
The hydraulic cylinder, electrical control frame and vacuum pump for opening and closing the vacuum door of the vacuum vulcanizer.

• With manual and semi-automatic operation modes;
• The control system adopts a well-known brand computer with multiple selection parameters and program memory mode;
• The hydraulic system adopts well-known brand oil pumps and hydraulic valves, with low noise, low energy consumption, and automatic pressure compensation;
• The vacuum pump adopts well-known brand, with high pumping efficiency, low noise and reliable operation;
• The number of deflation times, deflation time, and vulcanization time can be set, which is easy to operate;
• Lightning exhaust, saving time;
• The clamping mechanism adopts finite element structure analysis, and the rigidity of the system is good to ensure that the molded products have small flash and high quality;
• The action of the mechanism adopts a combination of fast and slow, and the operation is stable and reliable;

The rubber plate vulcanizing machine is mainly used for vulcanizing flat belts. It has the advantages of high pressure per unit area of ​​the hot plate, reliable operation of the equipment and less maintenance. The main function of the plate vulcanizer is to provide the pressure and temperature required for vulcanization. The pressure is generated by the hydraulic system through the hydraulic cylinder, and the temperature is provided by the heating medium. According to the structure of the frame, the flat belt vulcanizer can be divided into two types: column flat belt vulcanizer and frame flat belt vulcanizer; according to the number of working layers, it can be divided into single layer and double layer: according to hydraulic system The working medium can be divided into oil pressure and water pressure.
In the rubber industry of the plate vulcanizing press, the column type flat belt plate vulcanizing machine is an earlier model. The flat belt plate vulcanizing machine used in the past is mostly a column structure, but now it is mostly a frame structure. Compared with the column type flat belt vulcanizing machine, the frame type flat belt plate vulcanizing machine has the following advantages: Under a certain center distance, hydraulic cylinders with larger diameters are allowed to be installed, which can reduce the number of hydraulic cylinders, and has simple structure and maintenance. The amount is small.
 
Main Specifications For Other Machines:

 
Finished Products Images:

Factory Workshop: