Quality - Oriented, Offering Customer with Optimum Productivity and Profitability.
Product Details:
Payment & Shipping Terms:
|
| Clamp Force: | 200Ton | Injection Pressure: | 1800kgf/cm² |
|---|---|---|---|
| Plate Size: | 550x560mm | Min Mold Thickness: | 100mm |
| Plunger Strike: | 400(500)mm | Heating Plates Distance: | 500-600mm |
| Dimension: | L2600*W2000*H4000mm | Total Power: | 30.3KW |
| High Light: | silicone injection machine,silicone mould making machine |
||
200 Ton Vertical Type irregular Silicone Isolator Making Mould Silicone Injection Machine For Electronic Product
Visible Feeding System:
To avoid the traditional techniques which cannot know about the situations like temperature/hardness/ Plasticizing before vulcanizing, can efficiently get control of the raw material Plasticizing status, can make adjustment in time.
Excellent Plasticizing Effects:
Excellent Plasticizing effects, reduce the waste rubber material, avoid blocking the cylinder, easy for cleaning. And easy to switch the different colors of raw material.
High Temperature Ranges:
Simple structure, Plasticizing temperature between 90 ℃ and 100 ℃, ensure good Plasticizing effects.
Save Raw Rubber Material:
Can handle with the raw rubber material as hardness as 85°,can improve coefficient of utilization of raw material.
Specific Charateristics:
1. Suitable for automotive and electronic rubber parts, high / cold temprature precision rubber parts, especially NBR products.
2. All-in-out structure, sprueless injection without material loss controlable injecting material temperature.
3. Excellent for high precision molding part
4. 5-10 times better accuracy than conventional injection machine the measuring precision of 1000cc injection volume is up to ±0.1g
5. Anti-collision molding system prevent mold damage occurring from misalignment(patented)
6. Servo-controlled system up to 40% energy saving
7.Proportional backpressure controlling characteristic
200Ton Technical Parameters:
| Clamping Force: |
200 Tons |
| Injection Volume: | 2000 cc |
| Injection Pressure: | 1800kgf / cm² |
| Plate Size: | 550 * 560mm |
| Min. Mold Thickness: | 100mm |
| Plunger Stroke: | 400(500)mm |
| Heating Plates Distance: | 500 - 600mm |
| Tie Bar Distance: | 640 * 310mm |
| Mold Opening Stroke: | 2RT |
| Max. Operating Pressure: | 20MPa |
| Motor Capacity: | 15HP(11KW) |
| Heater Capacity: | 15.3KW |
| Total Capacity: | 30.3KW |
| Gross Weight: | 7.5Tons |
| Dimensions: | 2600 * 2000 * 4000mm |
The other capacity parameter:
| Model | Unit | 400VI-AO | 600VI-AO | 800VI-AO |
| Clamping Force | Ton | 400 | 600 | 800 |
| Injection Capacity | cc | 4000 | 6000 | 8000 |
| Injection pressure | kgf/cm² | 1800 | 1800 | 1800 |
| Operation table size | mm | 700*700 | 850*850 | 1000*1000 |
| Min. Mold Thickness | mm | 100 | 100 | 150 |
| Plunger stroke | mm | 400 | 500 | 500 |
| Distance of Thermo-plate | mm | 500～600 | 600～700 | 650～800 |
| Distance of Tie bar | mm | 820*395 | 970*500 | 1140*600 |
| Die sinking type | 2RT/ 3RT/ 4RT-Upper Ejector-Bottom Ejector | |||
| Max. Operating Pressure | Mpa | 20 | 20 | 20 |
| Motor Power | hp | 15 | 20 | 20 |
| Electric Heating Power | Kw | 24 | 29.75 | 35 |
| Total Power | Kw | 39 | 48.75 | 54 |
| Gross weight | Ton | 10 | 14.2 | 17.5 |
| Dimension | mm | L2750*W2265*H4200 | L3200*W2500*H4350 | L3450*W2750*H4500 |
Product Show:
Finished Product:
Contact Person: info
