300Ton Automatic Rubber Compression Moulding Machine 1800 Kgf/Cm2

300Ton Silicone Rubber Injection Molding Machine Energy Conservation For Rubber Modling

Visible Feeding System:

• To avoid the traditional techniques which cannot know about the situations like temperature/hardness/ Plasticizing before vulcanizing.
• can efficiently get control of the raw material Plasticizing status, can make adjustment in time.
• High Precision injection molding technicals applies to all complicated rubber parts injection molding.

Excellent Plasticizing Effects:

• Excellent Plasticizing effects, reduce the waste rubber material, avoid blocking the cylinder, easy for cleaning. And easy to switch the different colors of raw material.

High Temperature Ranges:

• Simple structure, Plasticizing temperature between 90 ℃ and 100 ℃, ensure good Plasticizing effects.

Save Raw Rubber Material:

• Can handle with the raw rubber material as hardness as 85°,can improve coefficient of utilization of raw material.

Specific Charateristics:

• Suitable for automotive and electronic rubber parts, high / cold temprature precision rubber parts, especially NBR products.
• All-in-out structure, sprueless injection without material loss controlable injecting material temperature.
• Excellent for high precision molding part
• 5-10 times better accuracy than conventional injection machine the measuring precision of 1000cc injection volume is up to ±0.1g
• Anti-collision molding system prevent mold damage occurring from misalignment(patented)
• Servo-controlled system up to 40% energy saving
• Proportional backpressure controlling characteristic

Machines Main Features:

This machine owns the function of automatic injection rubber and vulcanizing. After setting your vulcanization time, vulcanization temperature, exhausting times in this PLC cabinet, the machine will automatically close the mold, and vulcanization. After reaching time of vulcanization, the machine will automatically open the mold.

1. This machine owns function of automatic push and pull the mold in and out. After mold opening, the automatic adjustable rail device will push the bottom mold out.
2. The machine will automatically knock the mold. After pushing the bottom mold out, the machine will knock the bottom bold. This is named 2 RT.
3. This ejection device also can be designed for 3 RT and 4 RT. 3 RT means your mold is three pieces, 4RT means your mold is 4 pieces.
4. This machine is one unit structure. For traditional type machine, the principle machine and hydraulic station is divided into 2 parts. While for our new structure, it is one unit.
5. The PLC cabinet, LED screen, and other main electrical spare part is from Japan or Germany.
6. All hydraulic station spare part is from Parker Brand of USA.
7. For sealing, our company adopts the sealing from the NOK brand, it is from Japan.
8. For heating plate, cylinder, piston and other metal spare parts, all are processed in the CNC machine center, ensuring it has high accuracy and good quality.

Main Technical Parameters: