Isobaric Brake Pads Making Machine Manufacturing Equipment 400 Ton

Japan Hydraulic Technology Isobaric Molding Machine for Brake Pads 400 Ton Dual Plates

Friction Material & Steel Back Introduction:

• The brake pads include the steel back, the friction material and other main parts and other auxiliary components, ie the steel back is part of the brake pads.The steel back is mainly used for fixing.

1. The performance is in the manufacturing aspect: the powdery friction material (mostly) undergoes chemical and physical action at high temperature and high pressure, and is pressed onto the steel back to form a solid (also formed separately and then riveted). Some will add a cushion between the steel back and the friction material. This part does not have friction, mainly noise reduction, heat insulation and cushioning. - that is, fixed around;
2. In terms of use: the braking process is mainly caused by friction between the fixed brake pad and the brake disc rotating with the wheel to achieve the purpose of braking. The friction is generated by friction between the friction material and the brake disc. One force is to prevent the wheel. Rotating and braking, the opposite force acts on the car to generate torque. This force is transmitted to the vehicle through the steel back (through the brake caliper), that is, fixed to the force transmission.

Brake Pads Molding Machine Brief Introduction:

• The hydraulic press is mainly composed of two parts: a complete hydraulic press consists of the main engine and the control system. The main engine consists of the fuselage, the ejection cylinder, the master cylinder and the liquid filling device. The control system is mainly responsible for one power. Aspect of the demand. Including fuel tank, low pressure control system, high pressure pump, electric motor and various pressure valves and directional valves.
• There are many types of hydraulic presses on the market. Of course, its use is also varied according to the needs of the market, such as hydraulic presses and hydraulic presses. Due to the high pressure of the hydraulic press, it is widely used in forging and stamping. The first over-10,000-ton hydraulic press manufactured in China is a free forging hydraulic press. The free-forging hydraulic press does not use a mold. The die-forged hydraulic press uses a mold. The hydraulic press is roughly divided into two types.
• At present, the hydraulic presses on the domestic market are mainly divided into four-column hydraulic presses, horizontal hydraulic presses and single-column hydraulic presses. Main uses: mainly divided into metal forming hydraulic presses, bending hydraulic presses, stretching hydraulic presses, press-fit hydraulic presses, Extrusion hydraulic presses, etc. are too many to list, widely used in: electronics, home appliances, hardware, sports equipment, plastics, furniture, automobiles and many other industries, so it can be said that almost all production industries see It's figure.

Machine Main Parameters:

Main Accessories of the Machine:

Reference Images: