Electronic Control System Vacuum Compression Molding Machine 250 Ton Column Structure

Factory Direct Supply Vacuum Compression Molding Machine 250 Ton Column Structure
 

Vulcanizing Machine Maintenance Principles:

1. The vulcanizer should be stored in an environment with good environment and good ventilation to avoid the wetness of the electrical circuit caused by moisture, thus affecting the normal use of the equipment!
2. Avoid using the vulcanizing machine outdoors on rainy days to prevent the heating plate and the electric control box from entering the water!
3. If the vulcanizer is used in a humid, watery environment, when disassembling and handling the vulcanizer, the article should be padded so that the equipment has a certain distance from the bottom edge. Do not let the vulcanizer and water directly contact!
4. If the heating plate enters the water due to improper operation during use, contact the manufacturer for repair as soon as possible. If you need emergency repair, you can open the cover on the heating plate, first pour out the water, set the electric control box to manual operation, warm up to 100 degrees Celsius, and keep the line dry for half an hour, then dry the line, in manual state. Gluing, contact the manufacturer at the same time, and replace the line as a whole!
5. When the vulcanizer is not used for a long time, the hot plate should be heated every half month (the temperature is set at 100 degrees Celsius), and the temperature is about half an hour!
6. After each use, the water in the water pressure plate should be cleaned, especially in winter.

 
Main Features of Vacuum Compression Molding Machine:

1. The internationalization and standardization of spare parts.
2. Mechanical design of machine durability.
3. High wear-resistant plane for ion nitriding treatment.
4. The temperature distribution reaches a high standard of ±3 °C.
5. Exhaust accuracy reaches a full demand.
6. Operation of a stable and quiet oil circuit design.
7. Complete graphical operation manual and maintenance manual.
8. The cylinder base adopts 3D computer mechanics analysis, auxiliary structure design, integrated casting molding, strengthening plane precision and structure, and guaranteeing the life of the machine.
9. The tripod adopts square steel beam structure design to ensure the stability of the machine.
10. Pressure control goes beyond traditional pressure gauge control, and pressure sensors are used to control pressure more accurately.
11. The powerful and convenient operation of the electronic control system and the effective and stable hydraulic system.

 
Main Parameters for Other Machines: