100 Ton 2 Working Stations Rubber Press Vulcanizer

100 Ton 2 Working Stations Rubber Press Vulcanizer

Guangzhou Juchuan Machinery Co., Ltd with many years of production experience, professional design, production of various types of vulcanizing machine, flat vulcanizing machine, conveyor vulcanizing machine, tape joint vulcanizing machine, rubber vulcanizing unit, rubber vulcanizing machine, tape vulcanizing machine, inner tube vulcanizing machine and other equipment. In the long-term production of flat vulcanizing machine, we have summarized some methods for improving efficiency in the production of flat vulcanizing machine. It can also be said that the innovation of our related personnel, the following is for everyone. basic introduction:

Without changing the overall structure of the flat vulcanizing machine, we can only start from other aspects, that is, to change some local structures or change some parts to improve the vulcanization efficiency of the flat vulcanizing machine.

In order to improve work efficiency, it is necessary to reduce the power consumption during the vulcanization process of the flat vulcanizing machine. We can use the electromagnetic clutch passive anti-drive reel form to reduce the friction between the wire rope spindle and the reel, reduce the power required for pre-tensioning, and accurately provide The pre-tension of the single steel rope reduces the number of reducer-motor unit groups. This can reduce the energy consumption and maintenance difficulty, reduce the overall space size of the wire rope pre-tensioning station, and improve the convenience of replacing the wire rope spindle. In terms of reducing the size of the space, the individual hydraulic cylinders are distributed and the force is already occupied by the space, and the wire ropes with different wire diameters are used.

• If the vulcanizer leaks water, first check whether the vulcanizer production material contains a lot of water. If it is not, you should see if the car is perfect. Then try the rotor, the mixing chamber, the discharge door and the hammer to check the leak position.
• The vulcanizer is difficult to leak water. The main reason for this is carbon black. Because carbon black absorbs moisture in the air, a large amount of water vapor is generated when the mixing temperature is about 100 degrees. Water will mistakenly think that the mixer is leaking water. The way to eliminate the water vapor is to lift the water pressure gas several times during each mixing process, so that there will be no water.