Large Curing Press Brake Pad Making Machine , 4 Colume Brake Pad Manufacturing Equipment

500 Ton Rubber Brake Pad Making Machine Large Curing Press For Car Brake Molding

Machine Main Features:

1. Save 30-40% raw material when injection When injection, our machine with the 400 ton clamp force which can full enough to provide with the injection pressure and injection volume, then can make sure injection goes in a good way, thus avoid to some fake products or some die rubber during the procedure of injection.
2. Ensure every brake pad is the exact same As this machine with it's special design for the heating plates and for the injection system, it can make sure evry finished brake pad is the exact the same. The exact the same bake pad is very important for a vilcle when met with emergency, the brake system can immediately stop the movement, thus to avoid some trafic accidents.
3. Automaticly adjust to balance the 4 cylinders pressure The 4 cylinders design can increase the space of pressure, thus can ensure the balance pressure of each space of the mould to be the same, only with the same pressure, can the injection effects to be good.

.

Machine Safety Specification:

1. Any technician or operator must read this safety specification carefully before operating the machine and strictly abide by it. Otherwise, it may cause serious bodily injury and even endanger life.
2. Qualified technicians are allowed to operate the machine, and non-technical personnel must be trained enough to operate the machine until they know how to operate safely.
3. The crane can be transported by crane or forklift, and the lifting capacity of any handling tool must be greater than the net weight of the machine
4. Non related maintenance personnel shall not enter the scope of operation of the machine, and it is strictly forbidden to operate a machine at the same time by two persons.
5. When the mold is closed, the hand should not be extended into the mold cleaning or other operations, so as not to cause serious bodily injury accidents.

Installation and Working Conditions:

1. voltage: 342V to 418V of normal voltage;
2. Power supply frequency: 49.5Hz to 50.5Hz of normal frequency;
3. Ambient temperature: 10 C ~ 40 C;
4. Relative humidity: 30 ~ 85% (no condensation water);
5. Environment: no excessive dust and acid, corrosive gas and salt;
6. Avoid abnormal vibrations;
7. Earth must be grounded;
8. Altitude: 0~1500 meters

Machine Main Applications:

It is used for other flat vulcanizing rubber molded products, such as: rubber / silicone products, seals, O-rings, oil seals, rubber shock pad, keyboard, medical rubber parts, electrical insulation parts and other kinds of rubber products and bakelite products , crafts and other models pressing. This equipment is mainly suitable for all kinds of automobile&motorcycle brake pads.

Our Professional Services:

• Rubber Hydraulic Molding Machinery Design, Manufacturing, Maintenance, and Technical Consultation & Output.
• Rubber Product Formulation R&D.
• Rubber Hydraulic Molding Machinery Complete Factory Machine Supplying.
• Silicone Rubber, Carbon Fiber Composite Material High Pressure Molding Machinery.
• Turn-key Program in Rubber Industry.

Machine Main Parameters:

MAIN PARTS OF MOLDING MACHINE:

Reference Images: