Twin Vacuum Pumps Compression Moulding Machine 5 Years Warranty

5 Years Warranty 250 Ton Twin Vacuum Pumps Vacuum Compression Moulding Machine

 
Vulcanizing Machine Heating Plates Features:

Flat vulcanizing machine is used in many enterprises. Its main feature is to provide pressure and temperature. This temperature comes from the heating plate, which can be divided into the following aspects.

1. The upper and lower heating plates of the vulcanizer are small in size and light in weight, with low energy consumption and fast heating. After heating, the whole plate has considerable flexibility. It is tighter than the conventional machine. The tightness is not more than 0.03mm, and the conventional machine does not have this performance.
2. The upper and lower heating plates of the vulcanizer supply heat evenly. After entering the heat preservation stage for 10 minutes, the temperature difference between the working faces is only ±3 °C ~ 4 °C, which exceeds the international standard.
3. The time from normal temperature to vulcanization temperature (145 °C) is no more than 25 minutes, the power is half lower than that of the same industry at home and abroad, and the energy saving effect is good.
4. Vulcanized glue or repair once formed, the bonding site is smooth, smooth, and the fastness is no different from the original tape.
5. The upper and lower heating plates of the vulcanizer are three-in-one, and the structure is simple and easy to install.

Analysis of Vulcanizer Wear​ Problems:

• The vulcanizing machine is made of metal and has high hardness. It is subjected to vibration shock and other compounding forces during production and operation, resulting in gaps in the parts and causing wear. 
• The traditional repair methods include surfacing, thermal spraying, brushing, etc., but these methods have certain drawbacks: surfacing will cause the surface temperature of the parts to be too high, causing deformation or cracking of the parts, affecting dimensional accuracy and normal use. In severe cases, it will lead to breakage; although the brush crossing has no heat effect, the thickness of the crossing layer should not be too thick, the pollution is serious, and the application is also greatly limited.
• At present, Western countries have applied the polymer composite method to the above problems, and the mature application is the Meijiahua technology system. Its comprehensive performance and mechanical machining characteristics at any time can meet the requirements and accuracy after repair, and can also reduce the shock and vibration of the equipment during operation and prolong the service life. Because the material is a "variable" relationship, when the external force impacts the material, the material will deform and absorb the external force, and expand and contract with the expansion or contraction of the bearing or other components, and always maintain a tight fit with the component to reduce the probability of wear.
• In addition, for the wear of large vulcanizers, "mold" or "mating parts" can also be used to repair the damaged equipment on site, avoiding the overall disassembly of the equipment, ensuring the fit size of the components, and meeting the production and operation requirements of the equipment.

 
Main Parameters for Other Machines:

 
 
 

 
Finished Product: