Silicone Big Plate Vulcanizing Machine 100 Ton 2 RT Openning Stroke Double Molding Station

Silicone Big Plate Vulcanizing Machine 100 Ton 2 RT Openning Stroke Double Molding Station

Choose the right molding machine according to different plastic products. A good molding products, can achieve the effect of half work half. Improving the quality of products also improves the production efficiency, and recently improves the production capacity, that is to say, can create more profits for the enterprise. Therefore, the choice of a good plastic molding machine equipment is crucial.

Main Technical parameter:

Clamp force: 100 Ton

Platen size: 400*460mm

Plunger stroke: 200mm

Heating plates: 200-300mm

The bar distance: 490*230mm

Mold openning stroke: 2 RT

Max. operating pressure: 20 MPa

Motor capacity: 7.5 (5.5Kw)

Heater capacity: 25.4kw

Total capacity: 25.4kw

Gross weight: 5 Ton

Machine's dimension: 2500*2080*1950mm

In the production process of using flat vulcanizing machine, we must understand some safety operation requirements to avoid safety accidents. Below we list some basic safety operation procedures, I hope the operators can take it seriously.

1.  All molds must be centered when placed in the flat plate. Take the gloves with the mold to prevent burns.
2. When the test piece is stuck, open the mold and be careful to prevent it from falling.
3. Adjust the pressure gauge according to the die size and the specified unit pressure. It is strictly forbidden to overpressure vulcanization.
4. It is strictly forbidden to accumulate uneven plates in the flat plate.
5. When cutting the sample with the vulcanized board, the protective rubber sheet must be placed.
6. If the equipment is faulty, the power must be cut off before processing.
7. When taking the test piece from the mold, pay attention to the cavity of the cavity and the surface of the die to protect it from scratches.
8. It is strictly forbidden to take the mold or clean up the debris when the flat plate is raised.
9. Do not use the flat vulcanizing machine beyond the specified temperature.
10. When not in use, turn off the power, put down the pressure, and close the oil valve.

Other Machine Technical parameter: