Industrial Vacuum Compression Molding Machine 250mm Heating Plate Stable Performance

Rubber Black and Grey Irregular Sealing Gasket 200Ton Vacuum Compression Molding Machine For Complicated Parts

3RT Features:

1. The 3RT surpasses the traditional top opening mold that can be used for the triple or four mold plates with the design of opening mold and pushing out the mold in the between.
2. The opening mold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening and continuous pushing out the mold in between.

3RT Machine motions flow

1. Unload the mold
2. M1 goes up to open the mold
3. M2 goes up and separates from the mold
4. M2 goes down and close the mold
5. M1 goes down and close the mold
6. Load the mold

4RT Features:

The 4RT surpasses traditional top opening mold that can be used for taking out the final product when there are triple or four mold plates with the design of opening mold, pushing out the mold in between, and rising thimble to eject the final production.

4RT Machine motions flow:

1. Unload the mold
2. M1 goes up to open the mold
3. M2 goes up and separates from the mold
4. M3 follow the K goes backward
5. M2 goes down
6. L goes up take out the finished product, clean and place new material for re-start.
7. L goes down; M2 goes up, M3 follow the bottom plate goes forward.
8. M2&M1 go down.
9. Mold in, main ram goes up and molding than main ram goes down and mold-out when completed the process.

 Main parameter:

 
 
Product Show:

 
Finished Product: