Payment & Shipping Terms:
|Clamp Force:||500 Ton||Injection Volume:||10000-16000CC|
|Injection Pressure:||2000kgf/sqcm||Plate Size:||900x1100mm|
|Plunger Stroke:||400mm||Machine Dimensions:||5200x2600x3500mm|
automatic rubber moulding machine,
rubber transfer moulding machine
Dual Temperature Zones Control Horizontal Rubber Injection Machine for Rubber Boots
Plate Vulcanizing Machine Applications & Classificaions:
Plate vulcanizing machine is the main equipment commonly used in rubber industry. In the plastic industry, it is used as a pressing machine for processing thermosetting plastics or thermoplastics. It is mainly composed of a hot plate, a closed force-bearing member and a pressure mechanism. The main function of the plate vulcanizer is to provide the pressure and temperature required for vulcanization.
Analysis on Energy Saving Ways of Hydraulic Injection Molding Machine Motor:
The injection molding process of the injection molding machine is a cyclic process. A complete injection molding process consists of clamping, injection seat advancement, injection, pressure holding, cooling, plasticizing, mold opening, and ejector products. In this continuous process, the required pressure and time are different at each stage, where the clamping process requires a slightly higher pressure and the duration is not long; the injection process requires high pressure and the duration is very short; the pressure holding process Higher pressure is required, and the duration is not long; the cooling and plasticizing process only requires low pressure, and the duration is long, accounting for 40%-60% of one injection cycle; the pressure required for mold opening and ejection process is slightly High, the duration is not long.
In addition to the high pressure required during the injection process, the injection molding machine is lighter in other stages, especially during the cooling process. The oil pump is basically unloaded and has a long maintenance time. The pressure control of the injection molding machine can be achieved by controlling the output power of the oil pump motor.
Main Parameters For Machines:
|Operate table size||mm||700*700||700*700||900*1100||850*850||1000*1000||1200*1200|
|Min. Mold Thickness||mm||200||200||200||200||250||250|
|Distance of Thermo-plate||mm||600||600||900||700||750||750|
|Distance of Tie bar||mm||820*395||820*395||820*395||970*500||1240*590||1340*800|
|Die sinking type||2RT-3RT-4RT-Upper ejector-Bottom ejector|
Machine Reference Images:
If you want machine video and see how our machine produce silicone rubber products ,
please send enquiry to us!
Contact Person: info