Automatic Horizontal Rubber Injection Molding Machine With Servo System

700x1500mm Plate Size Horizontal Injection Machine For Making Silicone Insulator

Vulcanization common problems and treatment methods

1. After pressure relief, the pump pressure gauge does not return to zero

1. When the air is pressed, the air is deflected by the pointer. The pressure gauge is disassembled, the pointer is pulled out, and the zero is reset.
2. pressure overpressure, replace the pressure gauge

      2.Control box did not respond

Check the line, maybe the three phases are missing.

      3. Uneven temperature of the joint

a. The insulation board may be damaged and the insulation board needs to be replaced.

b. There may be some resistors on the heating plate that burn out.

     4. Water pressure plate seepage

1. Water is leaked at the screw or edge joint, and the screw is tightened along the water pressure plate.
2. water pressure plate rubber surface seepage, need to replace the rubber

550 ton horizontal rubber injection machine parameter

Clamping Force: 550 ton

Injection Capacity: 12000cc

Injection pressure: 2000kgf/cm²

Plate size: 700*1500mm

Min. Mold Thickness: 510mm

Plunger stroke: 700mm

Distance of heating plate: 960mm

Distance of Tie bar: 850*640mm

Die sinking type: 2RT-3RT-4RT

Max. Operating Pressure: 20Mpa

Motor Power: 5.5kw

Heater Power: 45kw

Total Power: 80kw

Gross weight: 25 ton

Dimension: L5200*W2600*H3500mm

Other capacity parameter: 

Machine details:

If you want machine video and see how our machine produce silicone rubber products ,

please send enquiry to us!