4Rt Layer Mold Vacuum Compression MoldingDouble Station Design L3360 * W2970 * H2850mm

300 Ton 4Rt Layer Mold Double Station Design Vacuum Compression Injection Machine Export To Pakistan
 
 
4RT Features:
The 4RT surpasses traditional top opening mold that can be used for taking out the final product when there are triple or four mold plates with the design of opening mold, pushing out the mold in between, and rising thimble to eject the final production.
 
 
4RT Machine motions flow:

1. Unload the mold
2. M1 goes up to open the mold
3. M2 goes up and separates from the mold
4. M3 follow the K goes backward
5. M2 goes down
6. L goes up take out the finished product, clean and place new material for re-start.
7. L goes down; M2 goes up, M3 follow the bottom plate goes forward.
8. M2&M1 go down.
9. Mold in, main ram goes up and molding than main ram goes down and mold-out when completed the process.

​Main Feature:

1. Every work station can be used independently with respectively hydraulic and power motor.

2. Special design movement platen with consistent 3. clamping force for better molded part quality.

3. High vacuuming/degassing speed.

4. Anti-collision Molding System prevent mold damage occurring from misalignment (Patented)

5. Adaptable with different mold model.

6. Suitable for sealing parts(eg.O-rings, gaskets), automotive parts, keypads, electronic rubber parts, etc.

300Ton parameter:

The other capacity:

 
 
Product Show: