300 Ton Horizontal Rubber Plunger Injection Machine

300 Ton Horizontal Rubber Plunger Injection Machine

Rubber Injection Machine Maintenance Points​:

1. The injection molding machine is a highly automated modern industrial machine. Its appearance has greatly improved the production efficiency and production quality of the injection molding industry. Injection molding machines are usually in a fully automatic and high-efficiency operation state, so the consumption of various parts of the machine is relatively large. While enjoying the convenience of injection molding machines, we must also do maintenance work, especially now. In hot weather, daily maintenance work is even more essential.
2. We must formulate appropriate daily, monthly and annual maintenance plans according to the machine's own conditions, and carefully implement them in each machine according to the plan. Before using the machine every day, we must first check whether the various parts of the machine are normal, such as whether the mechanical safety lock is working properly, whether the temperature and heating conditions of each section are normal, whether there is water leakage in the cooling water pipe, and whether the emergency stop button can cut off the power of the motor, etc. an examination.
3. After the machine is used for a long time, there will be a lot of stains on the oil filter and air filter. We should clean it up in time. At the same time, we must check whether the installation of the electronic ruler and proximity switch is normal and stable, the electric couple wire, heating coil, Whether the barrel is installed firmly, check whether the machine has oil leakage, if there is oil leakage, repair it immediately, check whether there is noise in the bearing combination of the hydraulic motor, if there is noise, refill the grease or replace the new bearing.
4. We need to regularly check whether the hydraulic oil needs to be replaced, and take samples of the pressure oil and send it to the laboratory for testing. If the hydraulic oil deteriorates, it must be replaced with new oil; the dust on the surface of the motor fan blades and casing must be cleaned frequently, and new grease should be injected into the flange bearings; Take out the filter element and blow it clean with compressed air from the inside of the filter element. At the same time, check whether the filter element is damaged. If it is damaged, replace it with a new one; check whether the fixing screws of the safety mechanism are tightened.

Other Model Specification Characteristics:​

 
Machine Reference Images:

 
If you want machine video and see how our machine produce silicone rubber products ,
please send your enquiry to us!