250 Ton Clamp Force Rubber Compression Machine With Dual Motors

Mantainance Free 250 Ton Clamp Force Rubber Compression Machine with Dual Motors

Advantages of the Hot Pressing Molding Machine:

• The excellent rate of finished products is almost perfect, the burrs are few and uniform, suitable for all kinds of sophisticated and sophisticated products, which is the best choice for the pursuit of high quality in the industry today.

Pressing Molding Machine Applications:

• Multi-lateral rubber parts, multi-angle and other complex products, especially for sporting goods, medical supplies, automotive supplies, electronic products and other sophisticated applications.

Vulcanizing Mantainance Points:

1.  The vulcanizer should be stored in an environment with good environment and good ventilation to avoid the wetness of the electrical circuit caused by moisture, thus affecting the normal use of the equipment!

2. Avoid using the vulcanizing machine outdoors on rainy days to prevent the heating plate and the electric control box from entering the water!

3. If the vulcanizing machine is used in a humid, watery environment, when disassembling and handling the vulcanizing machine, the article should be padded so that the equipment has a certain distance from the bottom edge. Do not let the vulcanizer and water directly contact!

4. If the heating plate enters the water due to improper operation during use, contact the manufacturer for repair as soon as possible. If you need emergency repair, you can open the cover on the heating plate, first pour out the water, set the electric control box to manual operation, warm up to 100 degrees Celsius, and keep the line dry for half an hour, then dry the line, in manual state. Gluing, contact the manufacturer at the same time, and replace the line as a whole!

5. When the vulcanizer is not used for a long time, the hot plate should be heated every half month (the temperature is set at 100 degrees Celsius), and the temperature is about half an hour!

6. After each use, the water in the water pressure plate should be cleaned, especially in winter.

Technical parameter: