250 Ton Automatic Vacuum Compression Molding Machine High Speed

50/60 Hz 250 Automatic Ton Vacuum Compression Silicone Rubber Moulding Machine

Vacuum forming features:
(1) Saving raw and auxiliary materials, light weight, convenient transportation, good sealing performance, and meeting the requirements of environmentally friendly green packaging;
(2) It can pack any special-shaped products, and no additional buffer material is required for packing;
(3) The packaged product is transparent, beautiful in appearance and easy to sell;
(4) The packaged products are suitable for mechanization and automatic packaging, which is convenient for modern management, saving manpower and improving efficiency.

Vulcanizer Installation & Testing:

1. Installation of vulcanizer: The main machine is installed by secondary grouting method and fixed horizontally on the concrete foundation with anchor bolts. After the oil station is placed at the appropriate position on the right side of the main unit and connected to the main oil, fix it with expansion bolts. If the operating surface is high, the settlement pit type, or the construction work platform, or a combination of the two may be selected according to the respective conditions during installation.
2. Due to the large size of the machine structure and heavy weight, it is transported after disassembly and disassembly before leaving the factory. The installation of the equipment has certain technical requirements, and generally should be attended by professionals.
3. Empty load test of vulcanizing machine: The empty load test should be carried out after the installation and commissioning, and the concrete is finally set. Before the empty load test, the hot plates of each layer shall be mounted with aluminum module plates, or padded with equal-area pads of sufficient area, and the thickness of the blocks shall not be lower than the standard thickness of the template.
4. After setting the working pressure of each oil pump, the relief valve is opened. Press the high pressure oil pump preload/start button, and rotate the corresponding relief valve handle clockwise to increase the pressure gradually. When the pressure rises to 18Mpa¬20Mpa¬, the high pressure oil pump is set to the pressure, and the handle is locked by the nut.
5. The pressure of the high pressure oil pump can be adjusted to 15Mpa 20Mpa, the data is for reference only, the specific pressure is user-defined. The working pressure of each oil pump is set.

  
 
Vacuum Compression Machine Parameters:

 
 
Machine Application Images: