Quality - Oriented, Offering Customer with Optimum Productivity and Profitability.
Product Details:
Payment & Shipping Terms:
|
| Clamp Force: | 100 Ton | Upper Platen Size: | 380*400mm |
|---|---|---|---|
| Lower Platen Size: | 400*460mm | Plunger Stroke: | 200mm |
| Heating Plates Distance: | 200mm | Motor Capacity: | 7.5*2 HP(5.5KW*2) |
| Color: | Blue | Machine Size: | 2500*2150*2080mm |
| High Light: | rubber compression moulding machine,rubber compression molding machine |
||
24 RT 100 Ton Twin Independent Working Station Vacuum Compression Molding Machine , Silicone Rubber Vulcanizing Machine
Vacuum injection molding is an advanced injection molding process (active exhaust method). Its principle is that after the mold is clamped, the vacuum mold is used to vacuum the mold cavity, and then the plastic is quickly injected, which is fundamentally solved. The effect of gas inside the mold cavity on the formation of the product. It completely solves the problems caused by poor mold exhaust, and can greatly shorten the molding cycle and improve the production efficiency.
Advantages of vacuum assisted injection molding“
1. Eliminate the influence of air on molding, and fundamentally solve the problem of poor exhaust.
2. The mold vacuum cavity is easy to fill, reducing the injection pressure and the back pressure of the injection molding machine,
3. Speed up the injection, reduce the molding cycle and improve production efficiency.
4. Improve the weld line of the product and improve the quality of the product.
5. Eliminate product defects, charring, and air bubbles.
6. Improve the filling effect of products and solve the problem of difficult filling of thin products.
Choose the right molding machine according to different plastic products. A good molding products, can achieve the effect of half work half. Improving the quality of products also improves the production efficiency, and recently improves the production capacity, that is to say, can create more profits for the enterprise. Therefore, the choice of a good plastic molding machine equipment is crucial.
Main Technical Parameters:
| Model | Unit | JC-250VF |
| Clamping Force | Ton | 250 |
| Upper Platen Size | mm | 600*600 |
| Lower Platen Size | mm | 650*600 |
| Plunger stroke | mm | 250 |
| Distance of Thermo-plate | mm | 250 |
| Distance of Tie bar | mm | 745*310 |
| Die sinking type | 2RT-3RT-4RT-Track | |
| Max Operating Pressure | Mpa | 20 |
| Motor Power | hp | 10*2(7.5KW*2) |
| Electric Heating Power | Kw | 15.3*2 |
| Vacuum Pump Power | Kw | 3*2 |
| Total Power | Kw | 51.6 |
| Gross weight | Ton | 11 |
| Dimension | mm | L3190*W2930*H2495 |
Other Vacuum Compression Machine Parameters:
| Model | Unit | 200VF | 250VF | 300VF | 400VF | 500VF |
| Clamping Force | Ton | 200 | 250 | 300 | 400 | 500 |
| Upper Platen Size | mm | 510*510 | 600*600 | 680*680 | 800*800 | 950*950 |
| Lower Platen Size | mm | 550*560 | 650*600 | 700*800 | 850*850 | 1000*1000 |
| Plunger stroke | mm | 250 | 250 | 300 | 350 | 350 |
|
Distance of Thermo - plate |
mm | 250 | 250 | 300 | 350 | 350 |
| Distance of Tie bar | mm | 640*310 | 745*310 | 785*380 | 940*450 | 1105*475 |
| Die sinking type | 2RT-3RT-4RT-Track | |||||
|
Max Operating Pressure |
Mpa | 20 | 20 | 20 | 20 | 20 |
| Motor Power | hp | 10*2 | 10*2 | 10*2 | 15*2 | 15 |
|
Electric Heating Power |
Kw | 13.5*2 | 15.3*2 | 24*2 | 26.4*2 | 36 |
|
Vacuum Pump Power |
Kw | 3 | 3*2 | 3*2 | 3*2 | 4 |
| Total Power | Kw | 45 | 51.6 | 69 | 84.8 | 49 |
| Gross weight | Ton | 7.8 | 11 | 15.45 | 18 | 14.5 |
| Dimension | mm | 2930*2500*2350 | 3190*2930*2495 | 3360*2970*2850 | 3650*3050*2900 | 1460*3600*3150 |
Machine Images:
Contact Person: info
