200 Ton Industrial Platen Hot Pressing Machine For Silicone Rubber Parts

200 Ton Industrial Apply Platen Hot Pressing Machine For Silicone Rubber Parts

Basic Technology about Plate Vulcanizing Machine:

In today's increasingly widespread use of vulcanizers, it is necessary to understand its technical principles, which will make your use easier.

1. When the motor of the vulcanizer is running, the oil enters the oil pump from the oil storage tank oil filter and enters the control valve through the oil pump drain pipe. At this time, if the manual control valve is in the closed position, the oil enters the oil cylinder through the control valve and the oil pipe. Drive the plunger up.
2. When the pressure of the vulcanizer reaches the specified value, if the motor is stopped, the check valve will automatically close, so that the pressure in the cylinder will be kept down. If the manual valve is opened, the lifting platform and the plunger will be self-weighted. The oil inside is pressed back to the storage tank through the cylinder manual control valve and the oil pipe, the hot plate is lowered, the pressure gauge is controlled on the control valve, and is connected with the hydraulic cylinder.
3. The vulcanizer is suitable for pressing various molded products, such as pressed rubber and plastic, as well as for sheet products. The machine tool has a four-column overall structure, and the pressing type is a down-press type, which is divided into three parts: a main unit, a fuel tank and an electric control box. The main unit is equipped with a column plug, a cylinder, a fixed plate, a movable plate and the like. The fuel tank has oil pumps, pipes, valves and other components. The oil pump is driven by a motor, and the electric control box is equipped with a push button switch, a magnetic starter, a timing alarm, a brake temperature controller, an overload protector, and the like.
4. When the vulcanizer overload can automatically cut off the power supply, the electric heating is controlled by the automatic temperature controller in three ways, and can be adjusted in the range of 20-200 degrees. When the temperature is reached, the circuit can automatically maintain the constant temperature to reach the set vulcanization time.

Vulcanizer Types and Application:

• Flat vulcanizing machines are generally used in the production and development of die-casting products such as gaskets. The main function is to provide the pressure and temperature required for vulcanization. When choosing a flat vulcanizing machine, you can choose the type and tonnage of the flat vulcanizing machine you need according to the size of the product. A typical small product can use a 30 to 50 ton flat vulcanizing machine.
• In the flat vulcanizing machine rubber industry, the column flat belt vulcanizing machine is an earlier type of machine. The flat belt vulcanizing machine used in China in the past is also a column structure, but at present, the frame structure is mostly used. The frame type flat belt vulcanizing machine has certain advantages compared with the column flat belt vulcanizing machine.

Machine Technical parameter: