Rubber Expansion Joints Hot Press Equipment Max Heating Temperature 220℃

Rubber Expansion Joints Hot Press Machine 1000 Ton Inverted Type Molding Machine

Inverted Installed Machine Advantages:

1. Make fully use of gravity to ensure pressing pressure, ensure the pressing effects.
2. Inverted type can greatly lower the working platform position, which is more convenient for staff to take finished products out.
3. Large pressing size can be widely apply to most marine rubber products.
4. Dual layers molds can be double working efficiency.

Difference Between Plate Vulcanizing Machine & Vacuum Compression Molding Machine:

• Vacuum flat plate vulcanizing machine is mainly used to vulcanize rubber products with complicated shapes, such as O-rings that need mass production, small bottle stoppers, complex lip seals such as rotating shafts, gaskets, and rubber with inserts Products, etc.
• The salient feature of this plate vulcanizing machine is that it can reduce the pores of the finished rubber products and improve the yield of the finished products.
• The vacuum flat plate vulcanizing machine is provided with a vacuum cover composed of upper and lower vacuum covers 2 and 7. When working, the product mold is sealed with a vacuum cover. In a vacuum state, the gas in the rubber compound is exhausted by a vacuum system after several mold closing and deflation operations, and then the mold is vulcanized.
• The plate vulcanizing machine for transfer molding products is mainly used to produce large cross-section and large-scale complex rubber products with or without metal inserts, such as shock absorbers, track pads, and pump impellers. The characteristics of this vulcanizing machine are that the preparation of the blank is simple, the size does not need to be particularly accurate, the size of the finished product is small, the flash is small, the appearance is good, and the vulcanization cycle is short.

Plate Vulcanizing Machine Parameters:

 
Machine Application Images: