Payment & Shipping Terms:
|Roller Diameter:||360*900||Input Material:||20-25kg|
|Roller Rate:||1:1.25||Motor Power:||30KW|
rubber mixing equipment,
rubber compounding equipmen
6.3 Ton Samll Size Open Type Rubber Mixing Equipment Rubber Mixing Machine With Emergency Brake Device
Introduction of two roll rubber open mixing mill:
Rubber kneader with completely sealed condition, materials are mixed or plasticized under certain pressure, controllable temperature, which makes high production efficiency and obtains excellent quality.
Materials could be mixed or plasticized with pressure and right temperature. Then the high effective production will be out.
The composition of the machine:
The machine is mainly composed : a base, a frame, front and rear rollers, transmission gears, a reducer, a pitch adjusting device, a roller temperature adjusting device, a safety switch and an electric control system.
Roller material is alloy chilled cast iron, with high hardness and wear resistance, roll temperature adjustment device can be introduced into the roller steam or cooling water to adjust the roll temperature to meet the process requirements.
1. The roll adopts the vanadium titanium metal alloy chilled cast iron and its surface is hard and wear-proof. The internal cavity is processed to make temperature well proportioned on the roll surface.
2. The machine is equipped with an overload protection device to prevent the main components from being damaged.
3. The machine is also equipped with an emergency brake device. When an emergent arises, just draw the safety pull rod, and the machine will stop immediately. It is safe and reliable.
4. The transmission system adopts a hardened tooth-surface reducer, which has a compact structure with higher transmission efficiency, lower noise and longer service life.
5. The base frame is a whole framework, which is convenient for installation.
6. The temperature of the roller surface is adjusted by the temperature adjusting device.
7. The roller bearings are lubricated by dry lubricants, which can be supplied by the user.
8. Use the hard tooth surface reducer to realize low noise work, durable, environmental protection.
1． The cooling of the machine must be carried out slowly during the operation of the machine to prevent the roller from rupturing due to temperature.
2． The lubrication of all parts of the machine is normal or not, directly affect the service life of the machine, it must be given full attention.
Lubrication provisions of the various parts of the machine oil as follows:
A． Roller bearings: ZG-3 calcium-based grease.
B． Speed ratio gear, drive gear are used 150 # medium pressure gear oil.
C． Reducer 150 # medium pressure gear oil lubrication, the first use of 500 hours, the replacement of lubricating oil once every 3000 hours oil change.
D． Reducer can water cooling, the specific figure.
Main Technical Parameters:
Contact Person: info