Payment & Shipping Terms:
|Roller Diameter:||450*1200MM||Input Material:||30-50KG|
|Roller Rate:||1:1.27||Motor Power:||55KW|
rubber mixing mill machine,
rubber mixing equipment
450 Mm Roller Diameter 24 Hours Working Tablet Press Rubber Mixer Machine For Naturel Rubber
What's Open Rubber Mixer Machine?
Open rubber mixer machine is mainly used for rubber plastic, rubber mixing, heating and tablet.
1. The roll adopts the vanadium titanium metal alloy chilled cast iron and its surface is hard and wear-proof. The internal cavity is processed to make temperature well proportioned on the roll surface.
2. The machine is equipped with an overload protection device to prevent the main components from being damaged.
3. The machine is also equipped with an emergency brake device. When an emergent arises, just draw the safety pull rod, and the machine will stop immediately. It is safe and reliable.
4. The transmission system adopts a hardened tooth-surface reducer, which has a compact structure with higher transmission efficiency, lower noise and longer service life.
5. The base frame is a whole framework, which is convenient for installation.
6. The temperature of the roller surface is adjusted by the temperature adjusting device.
7. The roller bearings are lubricated by dry lubricants, which can be supplied by the user.
8. Use the hard tooth surface reducer to realize low noise work, durable, environmental protection.
The operation of the machine :
must be carried out after the foundation is dry.
1． Completely check the connection of the electrical circuit is correct, roller and gear surfaces without inclusions.
2． Roller bearing grease cup filled with ZG-3 calcium-based grease. Gearbox should be joined 150 # medium pressure gear oil. Add 150 # medium pressure gear oil in the gear guard, the oil surface height is 1.5-2 tooth depth is appropriate.
3． After finishing the above preparations, adjust the roll distance to 3-5mm, turn the coupling by hand to confirm that there is no jamming or bad behavior before driving.
4． Test the emergency brake, the no-load inertia <1/6 turn, press the jog reverse button can be reversed.
5． Continuous running time of the machine should not be less than 4 hours, idling running current shall not exceed 50% of the rated current of the main motor, and roller bearing temperature shall not exceed 20 ℃.
Main Technical Parameters:
Contact Person: info