Rubber Bellows Horizontal Rubber Injection Molding Machine With 12000CC Volume

Rubber Bellows Molding Injection Machine 550 Ton With 12000CC Injection Volume

Features of the upper and lower heating plates:

1. The machine is equipped with a three-in-one heating plate, which is simple in structure and easy to install.

2. The heating plate on the upper and lower sides of the machine is evenly heated. After entering the heat preservation stage for 10 minutes, the temperature difference between the working points is only ±3 °C, which exceeds the international standard.

3. The upper and lower heating plates are small in size, light in weight, and light in weight. The energy consumption is low and the temperature rises quickly. After heating, the whole board has considerable flexibility. It is tighter than the conventional machine. Under 1.5mpa pressure, the parallel is not more than 0.03mm, the general machine does not have this performance.

4, vulcanization molding, the bonding site is smooth, smooth, and the fastness is no different from the original tape.

5. The time from rising from normal temperature to vulcanization temperature (145 °C) is about 30 minutes, and the energy saving effect is good.

550 ton horizontal rubber injection machine

Clamping Force: 550 ton

Injection Capacity: 12000cc

Injection pressure: 2000kgf/cm²

Plate size: 700*1500mm

Min. Mold Thickness: 510mm

Plunger stroke: 700mm

Distance of heating plate: 960mm

Distance of Tie bar: 850*640mm

Die sinking type: 2RT-3RT-4RT

Max. Operating Pressure: 20Mpa

Motor Power: 5.5kw

Heater Power: 45kw

Total Power: 80kw

Gross weight: 25 ton

Dimension: L5200*W2600*H3500mm

Other capacity parameter: 

Machine details:

If you want machine video and see how our machine produce silicone rubber products ,

please send enquiry to us!