Payment & Shipping Terms:
|Clamp Force:||100Ton||Injection Volume:||500cc|
|Injection Pressure:||1800kgf/cm²||Plate Size:||400*400mm|
|Min Mold Thickness:||50mm||Plunger Strike:||350mm|
|Heating Plates Distance:||400-500mm||Tie Bar Distance:||515*230mm|
silicone injection machine,
silicone mould making machine
100 Ton Hydraulic Pressure Silicone Phone Cover Making Mould Silicone Injection Machine For Mobile Phone
Visible Feeding System:
To avoid the traditional techniques which cannot know about the situations like temperature/hardness/ Plasticizing before vulcanizing, can efficiently get control of the raw material Plasticizing status, can make adjustment in time.
Excellent Plasticizing Effects:
Excellent Plasticizing effects, reduce the waste rubber material, avoid blocking the cylinder, easy for cleaning. And easy to switch the different colors of raw material.
High Temperature Ranges:
Simple structure, Plasticizing temperature between 90 ℃ and 100 ℃, ensure good Plasticizing effects.
Save Raw Rubber Material:
Can handle with the raw rubber material as hardness as 85°,can improve coefficient of utilization of raw material.
1. Suitable for precision temperature sensitive rubber parts, especially NBR products, used in automotive and electronic rubber parts.
2. Specially designed all-in and out structure, according to the field control injection temperature.
3. High-precision molding parts, to ensure efficient operation of machinery.
4. High precision, 1000cc injection volume measurement accuracy of ± 0.1 g, 5-10 times higher than the traditional injection molding machine.
5. The company's patent: anti-collision molding system to avoid damage caused by misplaced mold.
6. Servo control system - energy saving up to 40%
7. Proportional back pressure control. Can effectively control the pressure and the ratio of raw materials.
100Ton Technical Parameters:
|Operation table size||mm||550*560||700*700||700*700|
|Min. Mold Thickness||mm||100||100||100|
|Distance of Thermo-plate||mm||500～600||500～600||500～600|
|Distance of Tie bar||mm||640*310||820*395||820*395|
|Die sinking type||2RT/ 3RT/ 4RT-Upper Ejector-Bottom Ejector|
|Max. Operating Pressure||Mpa||20||20||20|
|Electric Heating Power||Kw||15.3||24||24|
Contact Person: info