Medical Silicone Rubber Molding Vulcanizing Equipment With Vacuum Cover

3 RT Opening Stroke 200 Ton Medical Silicone Rubber Molding Vulcanizing Equipment With Vacuum Cover

Main Technical Parameters:

Machine Operation Instructions:

• When the motor is running, the oil enters the oil pump from the oil storage tank oil filter and enters the control valve through the oil pump drain pipe. At this time, if the manual control valve is in the closed position, the oil enters the oil cylinder through the control valve and the oil pipe to drive the plunger. And the lower template platform rises. As mentioned above, when the pressure reaches the upper limit specified value, the electric contact pressure gauge contact control stops the operation of the oil pump motor, and the check valve is automatically closed, so that the pressure in the cylinder is maintained (the upper limit of the pressure gauge is up to Really adjust to the required working pressure, but can not exceed 16.0Mpa). The pressure is maintained to drop until the minimum required working pressure is adjusted. The electrical contact pressure gauge contacts control the operation of the oil pump. The oil pressure rose again. Until the vulcanization heating time is completed. The motor stops. Open the mold to take the workpiece.
• Fix the mold between the upper and lower platforms. Generally, it is heated by an automatic temperature control electric heating tube. The rubber is heated for a few minutes. That is, it is vulcanized to fix properties and shapes. The vulcanizer is somewhat functional like a steamed bun. !

If the manual control valve is opened, there is the self-weight effect of the lifting platform and the plunger, and the oil in the oil cylinder is pressed back to the oil storage tank through the manual control valve and the oil pipe of the oil cylinder, the lower template hot plate is lowered, and the electric contact pressure gauge is controlled. On the control valve and in communication with the hydraulic cylinder.

Main Features of vacuum vulcanizing machine:

The vacuum flat vulcanizing machine is suitable for the molding vacuum vulcanization molding process of rubber products, and is particularly suitable for producing various types of seals. The product is molded by vulcanization in a vacuum negative pressure environment, which is easier to vent and is less likely to form bubbles. The North Meteorite Vacuum Vulcanizing Machine has a single-seat form and a double-seat form. It is equipped with a safety coaming form and has a clamping mechanism. The user can choose to use according to the process requirements.

Vacuum vulcanizer 2RT features:
1, 2RT mold opening is suitable for a variety of two or three layer molds, is a multi-functional model.
2, using dual power, each oil circuit design, stable, quiet and low fault, the two axes can be operated at the same time.
3, with a slow calibration function, the calibration is more accurate and safer.
4. The positioning of the inlet and outlet molds is accurate, and there is a 100% positioning safety design to ensure that the mold is not damaged.
5. The clamping speed is adjustable, accurate and reliable.
The vacuum flat plate vulcanizing machine produced by Qingdao Beifang Petroleum Pressure Machinery Co., Ltd. has a vacuum cover of 650mmHG or more in 6 seconds. It is not suitable for molding, and it is most suitable for precision products.

Other Vacuum Compression Machine Parameters:

Real machine Images: