Payment & Shipping Terms:
|Clamp Force:||400 Ton||Injection Volume:||1000cc|
|Injection Pressure:||2000kgf/sqcm||Plate Size:||700x700mm|
|Plunger Stroke:||500mm||Heating Plates Distance:||600mm|
|Tie Bar Distance:||820*395mm||Max Operating Pressure:||20MPa|
automatic rubber moulding machine,
rubber transfer moulding machine
Industrial Rubber Piston Injection Machine OEM Horizontal Rubber Injection Machine
Improved technology helps energy saving and emission reduction:
Plastic machinery companies have listed control and cost savings as their top priority. At present, most plastic machinery has realized energy-saving transformation. At present, the servo energy-saving technology has been successfully applied to injection molding machines, which can save up to 80% of energy compared to ordinary fixed-pressure pump injection molding machines, and can save up to 50% compared with variable displacement pumps. At the same time, improve production efficiency by over 10%. Mass production has begun and will quickly become the mainstream product at home.
Energy saving technology is improving
After research and development by scientific researchers, electromagnetic heating (IH technology is a new type of high-frequency heating technology. Energy-saving and environmentally-friendly high-frequency heating systems are produced, and the heating efficiency is increased to 90% and up to 99.8%. The energy saving effect of the frequency heating system is very obvious for plastic processing enterprises, saving electricity by 30% -70%. It fully reflects its energy saving advantages, saves a lot of electricity costs for plastic processing enterprises, improves production efficiency, and improves the environment of the workshop, thus directly Reduce indirect production costs.
Then convert the DC power into high frequency high voltage power with a frequency of 20-40KHz. The electromagnetic heating equipment is specially made of high temperature resistant cables. The electromagnetic heating power saver is a device that uses the principle of electromagnetic induction to convert electrical energy into electromagnetic energy for heating. The electromagnetic heating saver converts 220V50 / 60Hz AC power into DC power. High-speed high-frequency and high-voltage currents passing through the coil will generate high-speed alternating magnetic fields. When the magnetic field lines in the magnetic field pass through the magnetically conductive metal material, countless small eddy currents will be generated in the metal body, so that the metal material itself will heat up at high speed. Heating effect.
It can also improve quality and improve working conditions. The servo injection molding machine can not only save resources and reduce costs. However, in the composition of the cost of injection molding products, electricity costs account for a considerable proportion. According to the requirements of injection molding machine equipment technology, the power consumption of traditional injection molding machine oil pump motors accounts for 80% -90% of the total equipment power consumption.
Injection Machine Parameters:
|Operate table size||mm||700*700||700*700||700*1500||850*850||1000*1000||1200*1200|
|Min. Mold Thickness||mm||200||200||510||200||250||250|
|Distance of Thermo-plate||mm||600||600||960||700||750||750|
|Distance of Tie bar||mm||820*395||820*395||820*640||970*500||1240*590||1340*800|
|Die sinking type||2RT-3RT-4RT-Upper ejector-Bottom ejector|
Machine Reference Images:
If you want machine video and see how our machine produce silicone rubber products ,
please send enquiry to us!
Contact Person: info