Hydraulic Silicone Press Machine For Making Swimming Hat With Double Heating Plate

300 ton hydraulic silicone press machine for making swimming hat with double heating plate

2RT Machine motions flow:

1. Setup the mold(initial status)
2. Supply the materials and start the process(close the mold)
3. Load the mold
4. The main ran goes up rapidly to a predetermined position,
5. The main ram goes up slowly, increase the pressure for molding. Expel bubbles out and curing.
6. The main ram goes down rapidly.
7. Unload the mold at a determined position.
8. Open mold and take out the final products.

300 Ton machine parameter:

300Ton Plate Vulcanizing Machine-double work station

Type: 4 Columns

Clamping Force: 300 Tons

Type of Oil Cylinder: with speed auxiliary cylinder

Diameter of Cylinder: Φ3000mm

Cylinder Stroke: 300 mm

Distance of Heating Plate: 300-400 mm

Heating Plate size:700*800mm

Distance of Tie bar: 785*380mm

Motor Power: 7.5kw*2

Gross weight: 15 ton

Dimension (L*W*H): 3360*2970*2250mm

 
Machine details:

1. Four columns, use 40Cr material:

2. Independent oil circuit design, double motor, can work alone

3. Adopt hard pipe (seamless steel pipe connection),More durable than ordinary hoses.

4. good reinforcement

 
Other parameters: