Payment & Shipping Terms:
|Clamp Force:||200 Ton||Plate Size:||550x560mm|
|Total Capacity:||42kw||Plunger Storke:||250mm|
|Gross Weight:||7.8 Ton||Machine Size:||L2930*W2350*H2230mm|
|Motor Capacity:||7.5kw *2||Plunger Stroke:||250mm|
|Heater Capacity:||13.5kw *2|
hydraulic vulcanizing machine,
rubber vulcanization molding machine
200 Ton Plate Vulcanizing Machine Silicone Rubber Moulding To Produce Silicone Glove
1. Mechanical synchronization balance mechanism: In the bottom of the platform there is a synchronous shaft running through the unit, the two ends of the shaft with rack and pinion, to ensure that the platform level up and down.
2. Mold clamping guide device: A mold clamping guide device is arranged on both sides of the lower pad stage, a guide plate is mounted on the frame plate and the platform, and the guide seat is processed with an inclined surface. The distance of the slope surface can be adjusted through the top wire.
3. Open mold boosting mechanism: When the mold is opened, the four cylinders below the platform act to force the platform to pull down to prevent the mold from being opened.
200 Ton paremeter:
Machine main body item:
|1||solenoid valve||Taiwan Hytek|
|2||control system(PLC)||Japan Mitsubishi|
|3||solid state relay(SSR)||China Sonon|
|4||oil pump||Japan Yuken|
|5||human machine interface(HMI)||Taiwan Panelmaster|
|6||mold base casting||Ductile cast iron(QT500-07)|
|7||main cylinder||one piece cast molding, ductile cast iron(QT500-07)|
|8||main motor||Taiwan Tatung|
|9||with PLC contact protection device|
Contact Person: info