Payment & Shipping Terms:
|Clamp Force:||200 Ton||Total Capacity:||7.8kw|
|Plunger Stroke:||250mm||Machine Size:||2930*2350*2050mm|
|Plate Size:||550*560mm||Machine Type:||Vertical|
hydraulic vulcanizing machine,
rubber vulcanizing equipment
380 V Hydraulic Press Compression Machine For Making Silicone Glove Brush
1. Seamless steel pipe connection to ensure there is no oil spilling.
2. Quick die closing cylinder: good effect to machine capacity.
3. Special design for reinforcement, it has good bearing capacity.
4. Use solid state; it is very stable and durable when machine in moulding.
5. Double motor provide enough power to machine independently.
6. Strong electricity and weak electricity are separately, it can make sure machine has good stable performance.
1. Wear protective equipment when handling, and do not use wet gloves.
2. Preheat the plate before vulcanization, check for any impurities between the plate layers, and whether other parts are normal. -
3. Pressure gauges, thermometers should be sensitive and effective, according to safety and process conditions, strict control of steam pressure, oil pressure and vulcanization temperature.
4. When loading the vulcanization mold, the hand should not reach into the flat plate to prevent hot hands and crushing. If problems are found, stop the problem. The mold used should be placed in a stable position to prevent falling and bruising.
5. After the operation is completed, cut off the power supply, close the water and air valve, and put the mold back to the designated place.
200Ton machine specs:
Type: 4 Columns
Clamping Force: 200 Tons
Diameter of Cylinder: Φ350mm
Plunger Stroke: 250 mm
Open daylight: 250-350 mm
Heating Plate size: 550*560 mm
Distance of Tie bar: 650*320mm
Motor capacity: 7.5kw*2
Heater capacity: 13.5kw*2
Total capacity: 42kw
Gross weight: 7.8 ton
Dimension (L*W*H): 2930*2350*2050mm
Contact Person: info