Payment & Shipping Terms:
|Clamp Force:||550ton||Plate Size::||700*1500mm|
|Total Power::||80KW||Max. Operating Pressure:||20 Mpa|
|Distance Of Tie Bar::||850*640mm||Heater Power::||45 Kw|
|Die Sinking Type::||2RT-3RT-4RT||Min. Mold Thickness::||510mm|
automatic rubber moulding machine,
rubber transfer moulding machine
700x1500mm Plate Size Horizontal Injection Machine For Making Silicone Insulator
Vulcanization common problems and treatment methods
2. During the warming phase, after a certain temperature, the temperature does not rise.
a. May not put insulation board, need to put insulation board
b. It is possible to open the vulcanization time and close the vulcanization time.
c. the insulation board is damp, need to replace the insulation board or dry the insulation board
3. Pressure can't go up
a. It is possible that the pressure on the water tank is too tight to press the water nozzle and loosen the bolts of the frame.
b. It is possible that the hydraulic pump has air to be exhausted.
c. The hydraulic pump may leak air. If the interfaces are not tightened, it needs to be retightened, or the gasket needs to be replaced.
550 ton horizontal rubber injection machine parameter
Clamping Force: 550 ton
Injection Capacity: 12000cc
Injection pressure: 2000kgf/cm²
Plate size: 700*1500mm
Min. Mold Thickness: 510mm
Plunger stroke: 700mm
Distance of heating plate: 960mm
Distance of Tie bar: 850*640mm
Die sinking type: 2RT-3RT-4RT
Max. Operating Pressure: 20Mpa
Motor Power: 5.5kw
Heater Power: 45kw
Total Power: 80kw
Gross weight: 25 ton
Other capacity parameter:
If you want machine video and see how our machine produce silicone rubber products ,
please send enquiry to us!
Contact Person: info