Payment & Shipping Terms:
|Clamp Force:||800 Ton||Injection Volume:||8000cc|
|Injection Pressure:||1800kgf/cm²||Plate Size:||1000x1000mm|
|Motor Power:||45HP(33KW)||Machine Dimension:||5120x2600x6600mm|
tyre manufacturing machines,
tyre curing press machine
800 Ton Low Bed Structure Rubber Curing Bladder Molding Machine
Tyre Molding Machine Main Features:
High-performance oil hydraulic system with automatic pressure compensation function can preset the time and pressure between two pressurizations and automatically conduct pressurization and depressurization supplemented with high-precision cylinder.
High-precision and abration-resistance guide pillar features strong loading force and stable lifting.
Imported KDB electric board features high-temperature resistance,abrasion resistance,fast thermal transmision and strength against deformation.
High-precison temperature sensor,together with LED temperature controller,built-in dense-point heating wire and tubular condenser,has the temperature range from normal temperature to 300°C.
Single heating can be designed according to the requirements.
Oil hydraulic system:the pressure range:30 ton,the maximum stroke of the cylinder:140mm.
Tyre Mould Injection Machine Advantages:
1. First - in first - out molding structure, to avoid compound aging
2. Low bed machine structure, easy for operating and demolding
3. Apply to automotive tyre moulding, motorbike tyre moulding, electric-bike tyre moulding.
4. Simplified technical process, can realize high temperature rapid vulcanization of rubber products and shorten production cycle.
5. Products are accurate in size, uniform in physical and mechanical properties and high in quality, especially suitable for the molding and vulcanization of products.
6. High qualified products, greatly reduce inferior products.
7. Simple operation, reduced labor intensity, high degree of mechanization and automation
Cost-efficient recommendation and high quality products with continuous improvement is key to our service for customer. We are committed to providing full after-market service to all of our customer though-out the world.
Main Technical Parameters:
|Clamp Force||800 Ton|
|Min. Mold Thickness||610mm|
|Heating Plate Distance||1600mm|
|Tie Bar Distance||1240x590mm|
|Max Operating Pressure||20MPa|
|Gross Weight||40 Ton|
Other Mode of This Machine:
|Operate table size||mm||700*700||800*800||1000*1000||1400*1400||1400*1400|
|Min. Mold Thickness||mm||110||150-450||610||920||920|
|Distance of Thermo- plate||mm||700||450~1100||1600||1900||1900|
|Distance of Tie bar||mm||820*395||820*395||1240*590||1540*860||1540*860|
|Heater Power||Kw||Steam heating/Heat transfer oil|
Contact Person: info