40Cr Hard Chrome Columns 300 Ton Plate Hot Pressing Machine Independent Oil Circuit

40Cr Hard Chrome Columns 300 Ton Plate Hot Pressing Machine Independent Oil Circuit

Machine Corrosion Resistance:

1. All materials of flat vulcanizing machine are selected for corrosion resistance;
2. All depictions are referred to as anti-corrosion depictions;
3. Use non-corrosive metals or non-metallic materials with strong corrosion resistance;
4. the use of corrosion inhibitors in the flat vulcanizing machine.

In other aspects, it is also possible to use a single-color offset press for surfacing, thermal spraying, adhesive, electroplating, brush plating, etc. to carry out anti-corrosion treatment of the flat vulcanizing machine. After the above method can be used to avoid corrosion of the flat vulcanizing machine, and then improve the service life of the flat vulcanizing machine.

Working Safety Policy:

1. Mechanical equipment must be inspected before operation, and it is strictly forbidden to operate with disease.
2. Before the bulldozer, road roller, excavator, loader and crane are started, it is necessary to check and confirm that there are no people in the rear and the bottom before starting. In the work, a special person is responsible for the command to prevent the injury of personnel and machinery.
3. When working in large-scale machinery, no one is allowed to perform any work within the scope of mechanical rotation.
4. When the machine is working at night, ensure that the construction site has sufficient lighting to ensure the safety of construction workers and construction machinery. Ensure on-site traffic safety.
5. Construction workers must wear safety helmets. Slippers and bare feet are strictly forbidden on the construction site.
6. The earth moving operation of the earth moving vehicle at the construction site must be directed by a special person to ensure the safety of the construction personnel inside the site.
7. All earthwork construction machinery operators must be certified to work and operate in accordance with various mechanical operating procedures.
8. All kinds of earthmoving machinery must be inspected before entering the site, and it is not allowed to carry sick work.
9. After the completion of the construction, the remaining materials must be cleaned up, and it is not allowed to pile up on the pavement or on the sidewalk.
10. Set safety warning signs at the well location to prevent personnel from falling.
11. The local fence is carried out at the construction site, which meets the requirements of civilized construction.
12. The mechanical operation process of excavating machinery must be strictly observed when excavating machinery. When people and machines are required to cooperate, the personnel are not allowed to leave the radius of rotation of the excavator boom, and the mechanical operators are not allowed to engage in earthmoving operations.
13. Before the bulldozer is driving, it is strictly forbidden to stand on the bracket of the track or the blade. There should be no obstacles around the machine, and the safety can be confirmed before starting.
14. After the roller is working, it should be parked in a flat and solid place and braked. Do not park on roadsides, slopes or places that impede traffic.
15. Before starting the grader, check the obstacles and pedestrians around the machine. After the first sound, start with the low speed, and check and confirm that the brake is sensitive and effective.
16. Persons who cooperate with mechanical operations such as clearing, leveling, and slope repair should work outside the radius of mechanical slewing. When it is necessary to work within the radius of gyration, the machine should be stopped and braked before it can be operated.
17. When multiple machines work together, keep a safe distance between front and rear.

Technical parameter: