Payment & Shipping Terms:
|Clamp Force:||400 Ton||Max Operating Pressure:||20Mpa|
|Total Capacity:||74.8kw||Diameter Of Cylinder:||Φ300mm|
|Mold Openning Way:||2rt-3rt-4rt||Distance Of Heating Plate:||300-400 Mm|
|Plate Size:||850*850 Mm||Tie Bae Distance:||940*450mm|
rubber vulcanizing equipment,
rubber vulcanization molding machine
400 Ton Two Press Desigh Plate vulcanzing Machine For Making Rubber Dust Cover
1. Wear protective equipment when handling, and do not use wet gloves.
2. Preheat the plate before vulcanization, check for any impurities between the plate layers, and whether other parts are normal. -
3. Pressure gauges, thermometers should be sensitive and effective, according to safety and process conditions, strict control of steam pressure, oil pressure and vulcanization temperature.
4. When loading the vulcanization mold, the hand should not reach into the flat plate to prevent hot hands and crushing. If problems are found, stop the problem. The mold used should be placed in a stable position to prevent falling and bruising.
5. After the operation is completed, cut off the power supply, close the water and air valve, and put the mold back to the designated place.
Machine main body item brand name:
1. Free technology training: you can come for inspection and training for free.
2. Free Installation and debugging: Our engineers will teach yu about the installation and debugging for free.
3. After-sales service: We will supply the free repairmen on this machine for one year, but will supply the maintenance lifetime. (The service is only for natural damage)
4. Online remote control for software problems, whatspp or wechat for video checking.
|Operation table size||mm||400*460||500*520||550*560||650*600|
|Distance of Tie bar||mm||490*230||590*270||640*310||745*310|
|Die sinking type||Track-Suspension-2RT-3RT-4RT|
Contact Person: info