Payment & Shipping Terms:
|Clamp Force:||200 Ton||Upper Plate Size:||510x510mm|
|Lower Plate Size:||550x560mm||Heating Plate Size:||250mm|
|Plunger Stroke:||250mm||Tie Bar Distance:||640*310mm|
|Motor Capacity:||10HP*2(7.5KW*2)||Heater Capacity:||13.5KW*2|
rubber compression machine,
rubber compression molding machine
200 Ton Vacuum Molding Machine 3RT Industrial Metro Rubber Parts Molding Machine
Vacuum Compression Molding Machine Brief Introduction:
In rubber engineering, rubber products with high performance requirements, such as sealed rubber parts (oil seals, 0-rings, etc.) and other rubber miscellaneous pieces, or rubber products with complex body structures, in order to ensure their forming quality (ie, completely eliminated) The appearance of defects such as lack of glue, gas, bubbles, weld lines, etc., facilitates the filling of the rubber and increases the density thereof, and now more and more rubber vulcanizers having a vacuum function are used.
The vacuum vulcanizer is a vacuum pumping system added to the ordinary flat vulcanizing machine. The hardware part of the system includes a vacuum pump, a vacuum cover and a special vacuum line for vacuuming; the software part is in the molding vulcanization process. After the mold is closed, a vacuuming program is added (the vacuuming time is controlled to ensure the vacuum degree in the vacuum hood). Before the mold is opened, there is a program for restoring the normal air pressure in the vacuum hood (ie, the pressure relief device is started).
Production using an vacuum vulcanizer, there are corresponding technical requirements for the forming mold used. The rubber forming mold for the vacuum vulcanizing machine has the following design requirements:
For the conditions of equipment without vacuum vulcanizer, if the product parts are required to be high and the quality requirements are required under vacuum, the vacuum forming rubber forming mold can be designed and manufactured. To adopt this process, a vacuum pump must first be installed and installed at a suitable part on the rear side of the vulcanizer. An operation switch is installed on the front side of the vulcanizer, and the vacuum pump is connected to the vacuum rubber molding die by a gas line.
The design principles of vacuum rubber molds are as follows:
Main Parameters for Other Machines:
|Upper Platen Size||mm||510*510||600*600||680*680||800*800||950*950|
|Lower Platen Size||mm||550*560||650*600||700*800||850*850||1000*1000|
Distance of Thermo
|Distance of Tie bar||mm||640*310||745*310||785*380||940*450||1105*475|
|Die sinking type||2RT-3RT-4RT-Track|
Contact Person: info