Payment & Shipping Terms:
|Clamp Force:||550ton||Plate Size::||700*1500mm|
|Max. Operating Pressure:||20 Mpa||Min. Mold Thickness::||510mm|
|Gross Weight::||25 Ton||Injection Capacity::||12000cc|
automatic rubber moulding machine,
rubber transfer moulding machine
700x1500mm Plate Size Horizontal Injection Machine For Making Silicone Insulator
Vulcanization common problems and treatment methods
1. Hydraulic plate deformation
The racks are less or not evenly arranged, the bolts are not tightened, and the water pressure plate needs to be replaced.
2.Heating plate deformation
a. the rack is less row
b. When the large-size vulcanized board is connected to the small-size tape, the gap is not filled up.
3. Pressure can't go up
a. It is possible that the pressure on the water tank is too tight to press the water nozzle and loosen the bolts of the frame.
b. It is possible that the hydraulic pump has air to be exhausted.
c. The hydraulic pump may leak air. If the interfaces are not tightened, it needs to be retightened, or the gasket needs to be replaced.
Our machine main body:
B-1. Hydraulic Pump :Japan Yuken
B-2. Control System :PLC Japan Mitsubishi
B-3. Main Motor :Taiwan Tatung
B-4. Vacuum Pump :China Rufus
C-1. Main Cylinder Seal :Japan NOK
C-2.Pressure Gage :Taiwan
C-3. Magnetic Valve :Taiwan HYTEK
C-4. Other Valve :Taiwan
C-5. Pressure Pickup :HUBA, Switzerland
Other capacity parameter:
If you want machine video and see how our machine produce silicone rubber products ,
please send enquiry to us!
Contact Person: info