Payment & Shipping Terms:
|Clamp Force:||250 Ton||Upper Platen Size:||600*600mm|
|Lower Platen Size:||650*600mm||Plunger Stroke:||250mm|
|Heating Plates Distance:||250mm||Motor Capacity:||10*2 HP(7.5KW*2)|
|Color:||Blue Mix Orange||Size:||3190*2930*2495mm|
rubber compression machine,
rubber compression molding machine
2 RT Opening Stroke 250 Ton Vacuum Compression Molding Machine , Silicone Rubber Vulcanizing Machine
Main Features of vacuum vulcanizing machine:
The vacuum flat vulcanizing machine is suitable for the molding vacuum vulcanization molding process of rubber products, and is particularly suitable for producing various types of seals. The product is molded by vulcanization in a vacuum negative pressure environment, which is easier to vent and is less likely to form bubbles. The North Meteorite Vacuum Vulcanizing Machine has a single-seat form and a double-seat form. It is equipped with a safety coaming form and has a clamping mechanism. The user can choose to use according to the process requirements.
Vacuum vulcanizer 2RT features:
1, 2RT mold opening is suitable for a variety of two or three layer molds, is a multi-functional model.
2, using dual power, each oil circuit design, stable, quiet and low fault, the two axes can be operated at the same time.
3, with a slow calibration function, the calibration is more accurate and safer.
4. The positioning of the inlet and outlet molds is accurate, and there is a 100% positioning safety design to ensure that the mold is not damaged.
5. The clamping speed is adjustable, accurate and reliable.
The vacuum flat plate vulcanizing machine produced by Qingdao Beifang Petroleum Pressure Machinery Co., Ltd. has a vacuum cover of 650mmHG or more in 6 seconds. It is not suitable for molding, and it is most suitable for precision products.
Choose the right molding machine according to different plastic products. A good molding products, can achieve the effect of half work half. Improving the quality of products also improves the production efficiency, and recently improves the production capacity, that is to say, can create more profits for the enterprise. Therefore, the choice of a good plastic molding machine equipment is crucial.
Oil seal vacuum flat vulcanizing machine wants to achieve the desired effect, the vacuum requirement is relatively high, and now many oil seal vacuum flat vulcanizing machines have problems during work, many of which are related to "vacuum" related. In the event of a leak, the overall processing effect is certainly influential.
Generally speaking, there are many reasons for the leakage pressure problem of the oil seal vacuum flat vulcanizing machine. There are two common types:
1. The problem of the device itself
There is no practical way to do this. If the equipment is leaky or leaks, it is normal to have a leak. Of course, if it is a qualified product produced by a regular manufacturer, the problem is in the user's own body. Only timely repair of the equipment is required.
2. Material gasification
This problem is also a very tangled problem. It is not the cause of the equipment. Instead, some materials are vaporized by themselves when certain conditions are met. This causes the vacuum environment inside the oil seal vacuum flat vulcanizer to be broken. Affect the overall effect.
These are the reasons for the leakage pressure of the oil seal vacuum flat vulcanizing machine that is often encountered nowadays, and it is also a solution to the problem. It should be clear to the user of the oil seal vacuum flat vulcanizing machine.
Main Technical Parameters:
|Upper Platen Size||mm||600*600|
|Lower Platen Size||mm||650*600|
|Distance of Thermo-plate||mm||250|
|Distance of Tie bar||mm||745*310|
|Die sinking type||2RT-3RT-4RT-Track|
|Max Operating Pressure||Mpa||20|
|Electric Heating Power||Kw||15.3*2|
|Vacuum Pump Power||Kw||3*2|
Other Vacuum Compression Machine Parameters:
|Upper Platen Size||mm||510*510||600*600||680*680||800*800||950*950|
|Lower Platen Size||mm||550*560||650*600||700*800||850*850||1000*1000|
Distance of Thermo
|Distance of Tie bar||mm||640*310||745*310||785*380||940*450||1105*475|
|Die sinking type||2RT-3RT-4RT-Track|
Contact Person: info