Payment & Shipping Terms:
|Clamp Force:||200 Ton||Upper Plate Size:||510x510mm|
|Lower Plate Size:||550x560mm||Heating Plate Size:||250mm|
|Tie Bar Distance:||640x310mm||Total Power:||45KW|
|Electric Heating Power:||13.5*2 KW|
rubber compression machine,
rubber compression moulding machine
vacuum compression molding machine 200 ton, silicone modling machine for silicone baking product
1. Vacuum capacity: able to achieve high degree of vacuum. A standard vacuum method is used to make consistently high quality products.
2. Open the mold design: a new type of patent guide rail. Special design can be 90 degrees open angle, easy to operate.
3. Mold handling design: in the mold handling agencies to join a special design. It is durable and quiet. Fast and outdated.
4. Hydraulic System Design: The system uses high-pressure pump and low-pressure pump, which can shut down two presses at the same time. The system isless noise, stable performance, long service life.
5. Alignment: provide two different mold calibration speed: fast and slow, the user can choose to use according to the actual situation. It makes calibration more secure and accurate.
2RT Machine motion flow:
Setup the mold (initial status)
Supply the material and start the process(close the mold)
Load the mold
The main ram goes up to the predetermined position ready for entering a state of vacuum
Lower the vacuum mask. At the same time, suck out the air until a state of vacuum is reached.
The main ram goes up. Increase the pressure to expel bubbles out.
After the state of vacuum exist mo more, lift the vacuum hood and curing.
After curing, lower the main ram.
Unload the mold, open the mold.
Take out the final product and put new material in.
1. Every work station can be used independently with respectively hydraulic and power motor.
2. Special design movement platen with consistent 3. clamping force for better molded part quality.
3. High vacuuming/degassing speed.
4. Anti-collision Molding System prevent mold damage occurring from misalignment (Patented)
5. Adaptable with different mold model.
6. Suitable for sealing parts(eg.O-rings, gaskets), automotive parts, keypads, electronic rubber parts, etc.
The other capacity parameter:
|Upper Platen Size||mm||600*600||680*680||800*800||950*950|
|Lower Platen Size||mm||650*600||700*800||850*850||1000*1000|
|Distance of Thermo-plate||mm||250||300||350||350|
|Distance of Tie bar||mm||745*310||785*380||940*450||1105*475|
|Die sinking type||2RT-3RT-4RT-Track|
|Max Operating Pressure||Mpa||20||20||20||20|
|Electric Heating Power||Kw||15.3*2||24*2||26.4*2||36|
|Vacuum Pump Power||Kw||3*2||3*2||3*2||4|
Contact Person: info