200 Ton Silicone Vacuum Compression Molding Machine L3360 * W2970 * H2850

Embossed Silicone Machine 300 Ton Vacuum Compression Molding Machine

Specific Characteristic:

1. Vacuum Capability: It is capable of being high degree of vacuum. A standard vacuum method is used to make consistent high quality products. 
2. Mold Opening Design: A patent is granted for a new type rail mold opening. The opening angle is up to 90 degrees. It is very convenient for operation. Another feature of the new rail mold opening is that there is no need to remove the base of the rail mold opening while replacing molds. It promotes the work efficiency and safety.
3. Mold Loading / Unloading Design: Incorporate a special design into the mechanism of mold loading / unloading. It is durable, quiet. speedy and stale.
4. Hydraulic System Design: The system employs both high and low pressure pumps and is able to close both presses simultaneously. The system is quiet, reliable with minimum maintenance required.
5. Alignment: Two speeds of mold calibration are provided for users to choose form, fast and slow. It makes the calibration more safe and more accurate.

4RT Features:

    The 4RT surpasses traditional top opening mold that can be used for taking out the final product when there are triple or four mold plates with the design of opening mold, pushing out the mold in between, and rising thimble to eject the final production.

4RT Machine motions flow:

1. Unload the mold
2. M1 goes up to open the mold
3. M2 goes up and separates from the mold
4. M3 follow the K goes backward
5. M2 goes down
6. L goes up take out the finished product, clean and place new material for re-start.
7. L goes down; M2 goes up, M3 follow the bottom plate goes forward.
8. M2&M1 go down.
9. Mold in, main ram goes up and molding than main ram goes down and mold-out when completed the process.

Main Paremeter:

 
 
Product Show:

 
Finished Product: